Marxman SS1220

MARXMAN AUTOMATIC SLITTERS

The Marxman Plus provides all the capability and reliability of traditional Marxman machines, with the added efficiency of 8 pairs of auto setting slitter blades. It also includes the same user interface as the fully-featured Marxman Pro. This provides for automatic part nesting, waste minimization and integration with a wide range of business software via ShopLink. It’s also possible to connect an offline label printer to the Plus so that labels can be printed for manual application by the operator.

Features:

  • Powered Five Roll Straightener
  • All Shafts are Chrome Plated and Induction Hardened
  • Material up to 18 ga (1.25mm)
  • 8 Sets of Slitting Blades
  • 17-inch Touchscreen
  • Coil Management Software
  • ShopLink Integration Streamlines Production

  • Automatic, Easy-to-use Nesting Function
  • Optional Printer for Offline Manual Function
  • 20-minute slitter blade change-out
  • Networkable and Remotely Accessible
  • Maintenance Alerts via Email
  • Couple with a Wide Range of SWI Uncoilers & Recoilers

Specifications:

  • Maximum Speed: 50m/min (150FPM)
  • Length Repeatability: ±1mm (±0.040”)
  • Maximum Coil Width: 1244mm (49″)

  • Minimum Coil Width: 200mm (8”)
  • Electrical Supply: 415V/3PH/60HZ

Standard Accessories:

Film Applicator

Lorem ipsum dolor sit amet, sed possim expetendis necessitatibus te, novum sadipscing vix eu. Odio ridens intellegebat sed id, ne nam sumo tritani aperiri, cu utamur euripidis vel. Audire facilisi per et. Vis primis ocurreret ut. Affert doctus salutandi no has. Est an sapientem cotidieque. Duo et illud idque, mutat tibique cu est.

Film Applicator

Feed Table

Lorem ipsum dolor sit amet, sed possim expetendis necessitatibus te, novum sadipscing vix eu. Odio ridens intellegebat sed id, ne nam sumo tritani aperiri, cu utamur euripidis vel. Audire facilisi per et. Vis primis ocurreret ut. Affert doctus salutandi no has. Est an sapientem cotidieque. Duo et illud idque, mutat tibique cu est.

Feed Table

Auto Knife Positioning:

The Marxman Plus comes standard with 7 pairs of slitting knives which can be fully set in a little over 30 seconds.

Optional Accessories:

Apply labels to each blank. The label includes a barcode that can be scanned at your SWI Simplex or Duplex folder to automatically load the folding program for each workpiece.

Zebra Printer

SWI’s new Recoiler systems provide an effective low cost recoiling solution for occasional or frequent recoiling of coils to 11,000 lbs.

SWI’s range of modular uncoilers are the perfect coil feeding solution to complement any of SWI’s Marxman slitter/blankers or other process lines.

Modular Uncoiler

Optional Software Packages:

ShopLink software links the SWI Slitter and SWI Folder together to eliminate shop floor data entry. The barcodes produced by ShopLink can be scanned at the SWI Folder to instantly load the folding program for each part. ShopLink can also be used to record coil consumption, production date & also keeps track of offcut stock.

eBend Software by SWIeBend allows flashing & trim details to be sent directly from construction site to SWI Sheetmetal Machinery. Files automatically generated by the eBend app can be emailed directly to SWI’s range of Marxman slitters, Simplex & Duplex folders for direct manufacture without any further data input in the manufacturing process.

Additional Specs:

wdt_IDModelMax Material WidthKnivesMild SteelStainlessAluminumDriveShearMin. Slit WidthStraightenerApprox. Weight
1S1220mm1244mm
(49”)
8 Sets1.2mm
(18ga)
1mm
(20ga)
1.6mm
(16ga)
4kw
(5.0HP)
4kw
(5.0HP)
100mm
(4”)
5 Rolls3,500kg
(7,700lbs)