Marxman Pro

THE MARXMAN PRO AUTOMATIC SLITTER

The Marxman Pro model provides the world’s most advanced sheet metal blanking system. Based on the famous SWI Marxman, the Marxman Pro has the added benefit of auto knife setup, auto nesting, and optional part cut and label application capability.

No burrs, accurate slits & lengths, SWI paid particular attention to the traditional problems the slitter operator faces. Each issue is addressed with carefully engineered solutions. This provides fuss-free, accurate slitting and blanking. For a complete package, SWI offers a range of recoiling and uncoiling solutions to suit every budget.

The Marxman Pro can effortlessly produce an astonishing throughput with minimal operator intervention. Existing installations consistently produce around 200 parts-per-hour of machine runtime.

SWI’s ShopLink software links the SWI Slitter and SWI Folder together to eliminate shop floor data entry. The barcodes produced by ShopLink can be scanned at the SWI Folder to instantly load the folding program for each part. ShopLink can also be used to record coil consumption, production date & also keeps track of offcut stock.

Features:

  • Material up to 16 gauge (1.6 mm)
  • All Shafts are Chrome Plated and Induction Hardened
  • 8 Sets of Slitting Blades
  • 23″ Touchscreen
  • Powered Five Roll Straightener
  • Shoplink Integration Streamlines Production
  • Automatic, Easy-To-Use Nesting Function
  • Part-Cut Any Slit, No Unsightly Damage to Adjacent Parts
  • 20 Minute Slitter Blade Change Out
  • Networkable and Remotely Accessible
  • Coil Management Software
  • Maintenance Alerts via Email
  • Couple with a Wide Range of SWI Uncoilers & Recoilers
  • Label Printer and Applicator

Specifications:

  • Maximum Speed: 50m/min (150f/min)
  • Length Repeatability: ±1mm (±0.040”)
  • Maximum Coil Width: 1244mm (49″)
  • Minimum Coil Width: 200mm (8”)
  • Electrical Supply: 415V/3PH/50-60HZ
  • Label Printer System: Zebra Z4 or similar
  • Label Size: 75mm x 75mm (3″ x 3″)
  • Part Cut System Minimum Length: 400mm (16″)

Standard Accessories

Film Applicator

SWI  provides a film applicator that is standard on all slitting/CTL lines. This film application method provides excellent runability and is also easy to adjust. A built-in braking system controls the tension at which the film is applied to the metal.

Film Applicator

Feed Table

All SWI slitting/CTL lines come equipped with in-feed tables standard. This table serves two purposes. The first is, when coupled with an SWI uncoiler, the table allows one person to easily load the material into the machine. The second is to provide an area to easily apply the strippable film.

Feed Table

Part Cut System:

Unique to the Marxman Pro, 2 is the clever Part Cut system. The Part Cut allows ANY slit part to be separated and cut to length independently of adjacent slit parts and does not leave unsightly damage on the adjacent parts.

Automatic Labeling:

Apply labels to each blank. The label includes a barcode that can be scanned at your SWI Simplex or Duplex folder to automatically load the folding program for each work piece. This labeling system is simple and maintenance free.

Automatic Labeling

Auto Knife Positioning:

The Marxman Pro comes standard with 8 sets of slitting knives which can be fully set in a little over 45 seconds. This accessory comes standard with both the Marxman Pro and Marxman Plus.

Optional Accessories

SWI’s new Recoiler systems provide an effective low cost recoiling solution for occasional or frequent recoiling of coils to 11,000 lbs.

SWI’s range of modular uncoilers are the perfect coil feeding solution to complement any of SWI’s Marxman slitter/blankers or other process lines.

Modular Uncoiler

Optional Software Packages

ShopLink software links the SWI Slitter and SWI Folder together to eliminate shop floor data entry. The barcodes produced by ShopLink can be scanned at the SWI Folder to instantly load the folding program for each part. ShopLink can also be used to record coil consumption, production date & also keeps track of offcut stock.

eBend Software by SWIeBend allows flashing & trim details to be sent directly from construction site to SWI Sheetmetal Machinery. Files automatically generated by the eBend app can be emailed directly to SWI’s range of Marxman slitters, Simplex & Duplex folders for direct manufacture without any further data input in the manufacturing process.

Additional Specs

wdt_IDModelMax Material WidthKnivesMild SteelStainlessAluminumDriveShearMin. Slit WidthStraightenerApprox. Weight
1S1220mm1244mm
(49”)
8 Sets1.6mm
(16ga)
1.2mm
(18ga)
2.0mm
(.080in)
4kw
(5.0 HP)
4HP
(5.0HP)
100mm
(4”)
5 Rolls4,500kg
(10,000lbs)