Twin Mandrel Capstan Uncoiler
DESIGNED TO PERFORM AND BUILT TO WORK ROUND THE CLOCK
The SWI Twin Mandrel capstan style uncoiler is available in capacities of 12,000lbs and 4,400lbs. The 12,000lb capacity machines are suitable for coils to 1220mm / 48″ wide. The 4,400lb machines are suitable for narrow feed coils up to 1000mm (39″) diameter and 610mm (24″) wide – such as guttering and trim coils.
SWI has been manufacturing Twin Mandrel uncoilers for more than 20 years with all these machines still in operation today. Many are in high-volume, double-shift operations and have been operating nonstop since installed.
The new generation SWI Twin Mandrel is based upon the same reliable mechanical design that has kept dozens of these machines operating around the clock over the past 20 years. Features of the new design include on-board European hydraulics, European gearmotors, SEW variable speed drives, brass wedge expansion mandrels, and durable 1″ duplex chain drives.
Built-in Snubber
Powered rotate
Speeds over 250ft/min
Take A Look At It In Action
With clever zone guarding, it’s possible to safely load or unload the off-line mandrel while the on-line mandrel is in use. SWI Twin Mandrel safety systems are implemented in accordance with international safety standards, including dual channel emergency stop and guard circuits. Guard resets can only be performed from outside the protected areas.
The optional hydraulic coil cars are robust and designed for long-term serviceability. The four pillars have long, maintenance-free bushings with sealed end caps to prevent debris ingress. On-board hydraulics provide simple maintenance and adjustable speed control. Captive wheel tracks prevent tipping and a safety switch is installed to ensure that capstan rotation cannot be initiated unless the coil car is parked clear of the mandrels.
The simple yet effective mechanical design makes SWI Twin Mandrel uncoilers the perfect economical solution where fast coil changeover is required with minimum fuss.
6T Model Features
Industrial gear driven slew ring rotation
SEW variable speed drive
Durable brass wedge expansion system with easily accessible lube points
Electrical enclosure & lockable isolator
Deublin hydraulic rotary unions
Dual-channel emergency stop circuit
On-board hydraulic micro pack for expand/collapse
Duplomatic hydraulic valves
SICK laser 0-10V potentiometer for accurate and smooth speed control
Heavy-duty SEW Eurodrive gearmotors
Triple main shaft bearings – sealed
4 machined solid steel paddles with chamfered ends
All metal surfaces are nickel-plated or powder coated for long-lasting durable finish
Optional coil car
Zoned guarding for coil change out while operational
Safety features to prevent inadvertent capstan rotation
Shipped fully assembled to facilitate fast installation
Capstan rotation time around 40 seconds
Smooth slew ring rotation,
2T Model Features
SEW variable speed drive
OPTIONAL powered capstan rotation
Electrical enclosure and lockable isolator onboard
Deublin hydraulic rotary unions
Dual channel emergency stop circuit
On-board hydraulic micro pack for expand/collapse
Rexroth/Duplomatic hydraulic valves
High performance laser feed demand control
Gearmotor drives from SEW Eurodrive
Approximate accel/decel 3 seconds
Perimeter guarding available
Simple drive chain adjustment
Pneumatic snubber rolls fitted as standard
Mechanical Specifications
6-Ton (12,000 lbs)
| Capacity | 5.5 tonnes (6 tons) |
| Mandrel Length | 1,250mm (49″) |
| Min Mandrel Collapsed Dia. | 455mm (17.5″) |
| Max Line Speed | > 80m/min (> 250 ft/min) |
| Color | SWI Standard Colors |
2-Ton (4,400 lbs)
| Capacity | 2.5 tonnes (3 tons) |
| Mandrel Length | 600mm (24″) |
| Min Mandrel Collapsed Dia. | 450mm (16″) |
| Max Line Speed | > 50m/min (> 150 ft/min) |
| Color | SWI Standard Colors |
